SCotUS upholds finality of acquittals

In a per curiam decision decided on May 27, 2014, the Supreme Court of the United States again upheld the finality of acquittals against an attempt at a prosecutor’s appeal.

The trial of Esteban Martinez was set to begin on May 17, 2010. His counsel was ready; the State was not. When the court swore in the jury and invited the State to pre­sent its first witness, the State declined to present any evidence. So Martinez moved for a directed not-guilty verdict, and the court granted it.

So the Court found the Martinez not guilty, acquitting him of the charges against him because the State was not ready when the trial was convened. Talk about dropping the ball.

But things got worse when the prosecutor appealed. Yes, the prosecutor appealed the Court’s decision to grant a directed acquittal. The reason for the appeal: because the prosecutor felt their motion for a continuance should’ve been granted. But as the Court pointed out in denying the motion, the Court had already waited almost 5 years to hear the trial on felony charges — meaning they were essentially risking infringing upon Martinez’s right to a speedy trial.

What’s still worse is that the appellate Court sided with the prosecutor, stating that the trial court’s refusal to grant continuance meant Martinez was never in jeopardy. From what corner of their posteriors they pulled that tripe is beyond me. The jury was sworn in, the judge started the trial, the State refused to present evidence, and they’re trying to say the defendant was never, in essence, put on trial? Yikes!

But thankfully the Supreme Court of the United States stepped in to end this, declaring that Martinez was rightfully acquitted, and that acquittal means he cannot be retried, and that the Illinois Supreme Court “manifestly erred in allowing the State’s appeal”.

So again we have more affirmation on the finality of acquittals.

The case was Martinez v. Illinois, 574 US 833 (2014) (per curiam).

Morning realization

Wayne LaPierre has been quoted as saying, "The only way to stop a bad guy with a gun is a good guy with a gun."

And when that sentence was uttered, all the anti-gunners and gun control proponents went into outrage mode. Their responses to mass shootings and the like is, hate to say this, about the same as feminists saying "Don’t tell me to not get raped. Teach men to not rape." or "I shouldn’t need to defend myself against a rapist. Tell men to not rape instead." You know, that kind of passive attitude that they shouldn’t have to worry about the dangers of the world because other people should make them go away instead.

Except here’s the thing that a lot of gun control proponents won’t admit: they already believe what LaPierre said. They do truly believe that the only way to stop a bad guy with a gun is with a good guy with a gun, but only so long as the only people labeled "good guys with guns" are the police, because to them, there is no such concept as a "good guy with a gun" being a civilian, and regardless of how much we try to convince them otherwise, they just won’t believe it.

Water cooling build in my wife’s computer – Part VII

Build Log:

Well to begin, the CPU block is going through customs in Germany as I write this. I don’t have any reason to believe it won’t get through, but we’ll see. If you have any experience working with AlphaCool/AquaTuning’s RMA process, I’d like to hear from you, so leave a comment discussing it.

Salvaging a graphics card

I took another look at the graphics card that took the least amount of damage in this whole ordeal and wondered if it might be salvageable. I took some alcohol and was able to clean out a lot of the corrosion or whatever that mess was from around the capacitors before taking a multimeter to them. All of the parts came back as live, so that was a great sign. Things would’ve needed to be cleaned up a bit more to get all of the residue out before I’d consider putting it into a mainboard.

But there is a concern: the dripping fluid managed to eat away solder on the edges of the capacitors, but I was confident that the card could be salvaged. I just didn’t have the soldering skills to tackle such a tiny ordeal – actually I didn’t have any soldering skills at all, and I wasn’t about to try to acquire them on a $200 graphics card.

Instead I decided to turn to EVGA to see if they could help me. Their RMA page says this with regard to void warranties:

If your product is received damaged, EVGA will contact you with information and options to assist with filing a claim or offering a repair fee to avoid the product losing it’s warranty.

With that in mind, I opened a4 support ticket to see if they could help me:

Good day,

Before explaining things, I’d like to first quote your RMA page regarding “Void Warranty Policy”: “If your product is received damaged, EVGA will contact you with information and options to assist with filing a claim or offering a repair fee to avoid the product losing it’s warranty.”

I had a custom water cooling loop running in my computer for a couple months before the CPU water block ruptured. I had two EVGA GTX 660 SC graphics cards running in SLI in the loop at the time. One of the graphics cards is a complete loss as it caught fire, but the other graphics card appears to have sustained only slight damage from the liquid coolant, and I think is salvageable as it appears to have sustained only light damage to several small capacitors on the board.

My question is whether I can send this in on RMA for a repair, even with a fee being charged, based on what was quoted above from your RMA page?

They responded confirming what I thought with regard to this, and then created the RMA ticket so I could submit an RMA to send in the card, which was approved in short order. I’m thinking they’ll send me a refurbished card and then figure out what it’ll cost to repair this one. If the damage is all that I think it to be, they shouldn’t quote much on that. We’re talking small electronics parts – sure they may require a surgeon’s precision to solder, but it shouldn’t be all that bad. Cleaning the rest of the gunk from around them is bound to be the most time consuming part.

In preparing the card to be shipped for the RMA, let me say this: the IC Diamond compound is a great performing thermal compound, but a pain in the ass to clean off the smaller chips and surfaces you find on a graphics card, even with using ArctiClean. It cleans off metal surfaces quite easily, and I can wipe a good portion of it away before I need to go at it with the ArctiClean, but on the surfaces of VRMs and memory chips, it’s a pain to clean away. A flathead screwdriver and gentle scraping got a good portion of it cleaned away first before using the ArctiClean to get the rest.

Now I just need to get it in the mail.

Revisiting the pump

When I got the new pump top home I immediately went to work putting it together and tubing up a makeshift loop to try things out, and everything works like a charm, significantly better than with the Bitspower D5 mod top and the Swiftech housing I purchased initially. In hindsight, I should have just purchased that at the same time as the pump, but again, you live and learn. If I use this pump for a loop in my computer – which is quite likely – I’ll just need to make sure I get the pump top at the same time.

And the pump is quiet. I can hear a mild hum while it’s running on its lowest setting, meaning it’ll be practically inaudible over the fans that’ll be running under the radiator beneath it.

But just for good measure, and to see if I could silence it further, I decided to buy some rubber washers from Home Depot, along with some all-black M3s for mounting the pump mount plate to the radiator – the M3s I have are entirely silver, so having the all-black M3s blends everything together nicely and hides the mounting hardware. I also bought some longer M4s for going through the mount plate and the washer into the pump top. Once all the air was out of the pump and the small loop I have everything mounted into, you’d have to put your ear up next to the pump to hear it. And that’s only because putting your ear up next to it gives your brain the signature it needs to distinguish the pump from the rest of the background noise, meaning the pump is going to disappear behind the whir of the fans.

Add in a fan controller, and I should be able to get the system completely dead quiet at times. It’s going to have 5x120mm of radiator space, so I don’t think that’ll be difficult, even after the graphics cards are added back into the mix as it’ll just be the CPU initially… on 5x120mm of radiator space. Hey, I’ve seen builds with the just CPU on a quad radiator, and other overkill builds like that, but again they allow you to turn the fans way down and still give more than adequate cooling.

I’m guessing the Bitspower top puts a tight fit on this particular D5 pump as the flow comparison is like night and day. Now I was trying to tube it up so that the pump pushed water into the lower radiator first. This means that given the natural flow of air versus fluids, some if it wanted to go back into the pump, some wanted to go out through the other outlet. And with the Bitspower and Swiftech pump tops, the pump had a hell of a time trying to push against that, even with setting the pump to the maximum speed. Now with some fluid still sitting in the pump, the pump wasn’t in any danger while trying to figure this out, but it was frustrating to no end.

With the AlphaCool pump top, it could push against that without any problem at all. It needs to be pushed to max speed to get that initial pocket of air gone, but at least it could do the job.

So now I have a spare pump top that I’m not sure if I’ll be using later. As I said before, I’ll probably just sell it. I did buy replacement M4s for this one as well – all black as well so they’ll blend into it nicely – since one did end up going down a drain, literally.

In the mean time, the new top has 4 holes for 5mm LEDs, so I bought more LEDs and a board for powering them. I’ve decided I’m likely going to use just two of them, mainly because the more LEDs you have in the board, the dimmer the rest become – perhaps the better choice would’ve been a Bitspower LED Station. Plus the two holes in the front will be a nightmare on cable management as well as there’s no way to not see the cables, whereas using only the two holes in the top will still allow me a little leeway for tying the cables out of sight, even if I might need to use cellophane tape to keep the LEDs in place.

DSC_0794.jpg

I’m definitely looking forward to seeing how this’ll look with the rest of the lighting in her case.

Graphics card water blocks

Given the extent of the damage to the lower graphics card, cleaning the water block was straightforward. The upper graphics card, however, the one that bore the brunt of the damage, was a different story. Because that card ignited, there was some mild scorch damage to the water block, but thankfully not very extensive. It looked more like some of the melted components dripped onto the block and solidified.

DSC_0771.jpg DSC_0776.jpg

So my hope was that I’d be able to clean it away without having to make use of anything more than a mild abrasive. Enter ArctiClean.

DSC_0787.jpg

As you can tell by the above picture, it worked, but took several applications of the first part and a little elbow grease with a paper towel to clean it away.

Parts acquisitions

While everything’s been going on in the background with cleaning up the mess that the water block rupture created, I’ve also taken the time to acquire new parts to assist in getting a new loop up and running. I’ve already mentioned some, such as a clear acrylic top for the AlphaCool VPP655 pump and the small parts to go with that, along with the Koolance CPU water block.

Previously the radiator was mounted with M3 screws in the top of the 750D case, but those were going through grommets that come with the case. In disassembling everything, I discovered that several of the screws seemed to be barely held by those grommets. So instead of using the grommets, I’m going to be using other 00 rubber washers as the dampeners between the radiator and case, and I have #6 washers for the M3 screws. I will remove the grommets from the case when I am mounting the radiators.

For those who don’t know, #6 washers are 5/32″ (4mm) ID, 3/8″ (9.5mm) OD. The holes in which the grommets are currently installed are 1/4″ (6.35mm) diameter, and the heads of the M3 screws I used are 5.25mm.

To power all the fans in her system, I’m currently using a Bitspower X-Station I, but I was not aware until recently that not all of the 3-pin plugs on the board are 12V output – that’s what I get for not reading the description well enough. But I have wanted to get a fan controller for her system (and one for mine, eventually, as well) so that she can turn everything down when she’s not on her system and crank them back up when she’s gaming. I was looking at the Lamptron offerings, but decided to go with the Phobya TPC, which I’ve read is virtually identical to the Lamptron FC5V2 controller in function and capability. I was also seriously considering the FC5V3 until I encountered the Phobya offering. But given that the Phobya has blue text and that color cannot be changed, she might want to go with a Lamptron so she can have green text that matches the rest of her build – including the green-lit Razer mouse.

Once the transitions are done, I’ll be repurposing the X-Station to power a Raspberry Pi and and other things I intend to use with it, in part because it has a 5v output I can use to power the Pi – multiple Pis, actually, if I so desired.

And with the fan controller, I also decided to acquire a Koolance temperature probe. I’m planning to put it on the lower radiator. If you’ve seen AlphaCool’s radiators, you know there are 6 threaded ports on the radiator. I’m going to have the tap on one of the inlet ports, ensuring the drain is at the lowest point in the loop. On the outlet side is where I’m considering installing the temperature sensor plug since it’ll be easiest to install in that position and should be fairly out of sight.

The silence of the pump caused me to also consider a flow meter as well, but I opted against it right now. The RPM line from the pump should be adequate, and I can set an alarm on my wife’s mainboard based on that as well. I’ll probably consider a flow meter a little later down the line, though.

Defending due process

I understand it is frustrating seeing someone put on trial only to see them walk out of Court, having been acquitted of the charges in what many would’ve called a “slam dunk” case. And the unfortunate response to these trials seems to be an attack on due process itself.

On Facebook I am subscribed to the page “Refutations to Anti-Vaccine Memes“, and I like a lot of what they share, but their recent example just didn’t sit well with me:

10478186_718870461516299_3732523292410460878_n.jpg

A lot of people believe adamantly that OJ Simpson and Casey Anthony got away with murder. If they’d thrown George Zimmerman in with this, then whoever created this would’ve had the trifecta on that one.

If this was intended to be sarcastic, their intentions fell flat because it is far from. When someone tried to point out that it is intended to be sarcasm, I said this:

Rachel and Margaret, there isn’t any sarcasm here to be observed. Simpson and Anthony were both acquitted by juries because there was not enough evidence to satisfy the burden of proof. Holding up two acquittals as examples of Courts being “wrong” is absurd in the kindest terms.

And to anyone who might, don’t bother trying to argue the merits of the cases or whatever the facts of the matters are, as the trials are over and the acquittals set in stone, so whatever anyone has to say on the matter is immaterial.

Another person said this:

I too, must object to the use of these cases as examples of the court being wrong. The court, for a change, was absolutely right, in both cases, because it rejected crappy science. In the Casey Anthony matter, they couldn’t determine a cause of death but they COULD say it was murder? Absolutely garbage, and that tripe was coming from one of the leading forensic pathologists in the country. These were both, actually, excellent examples of the court getting it RIGHT, and not being influenced by hysteria and public opinion (as the anti-vaxx movement is trying to do) Maybe you should use the case of the Central Park 5…innocent boys sent away to prison, because THEN the courts got it wrong, partially because of media/public frenzy.

Later a person named Erin posted a couple comments, since removed, bashing people she felt were actually defending Simpson and Anthony, even going so far as to say that we’re “almost as bad as the anti-vaxxers”. Now I never watched the OJ Simpson trial. I was in high school at the time, and the trial went on during the day during the school year (though it did extend through the summer into the following fall), so I only saw whatever was reported on the news. And I never watched the Casey Anthony trial either, and the same with the George Zimmerman trial. And if you were to read through the other articles I’ve written on this blog regarding both cases, you’ll see I don’t defend either Zimmerman or Anthony. Instead what I am defending in discussing both cases is due process itself. And I said such on Facebook:

Actually Erin, I never saw either trial. Never watched OJ’s trial (I was in high school at the time, so couldn’t), and never watched the Casey Anthony trial either as I was never interested. As such, I’m not defending either. Instead I’m defending the due process that saw them acquitted, and the double jeopardy doctrines that mean they can never again be put on trial.

When you or anyone else puts up these two acquittals, or any other acquittal, as a demonstration of the court being “wrong”, you are attacking everyone’s right to due process, everyone’s right to be presumed innocent, merely because you “know” they are guilty. Umm, no you cannot know they are guilty, not unless you saw every single piece of evidence the investigators saw. Not unless you were part of the investigation that resulted in their arrests. Instead, like with vaccine science, all you can do is trust the right evidence was gathered and enough evidence was gathered to demonstrate the claim. And in the case of Anthony, Simpson and, I’ll add for good measure, Zimmerman, the evidence wasn’t their [sic] supporting the charges. Plain and simple.

And regardless of what you might think, they do still retain their right to be presumed innocent because of their acquittals. If you expect that right for yourself, respect it for everyone else.

There’s a big difference between defending a person and defending a principle. There’s a big difference between supporting a defendant and supporting their right to defend themselves against accusations. There is a big difference between defending what someone has done and the right to have those actions proven in a Court of Law beyond reasonable doubt.

I don’t defend the defendants. Instead I defend due process. I defend double jeopardy. I defend the processes to which I may one day become subject, and the rights that I want to be able to exercise should that happen. As I expect those rights and processes for myself, I defend them and respect them for everyone else.

The “court of public opinion” is a Court in which there is no presumption of innocence and no due process. All verdicts are determined before the actual criminal trial begins, and if the criminal trial results in a verdict that differs from the court of public opinion, then due process in the criminal court is itself attacked, the jury process attacked as well, and everyone’s rights suffer for it.

Yet it is a problem that is not going away any time soon, if ever.

Replying to Jen Gunther, MD, regarding campus rape and sexual assault

A man writes an article that mentions rape and it’s twisted into a few different directions by a feminist. Nothing new. Because one thing a lot of men don’t seem to realize is the fact that rape is owned by feminism, to be defined and refined however they wish. Today’s article is in response to Jen Gunther, MD, who is an OB/GYN, and her article titled “An OB/GYN writes to George Will about college rape“. She was responding to George Will’s recent article in the Washington Post.

Take it away, Doctor.

I read your recent column on the “supposed campus epidemic of rape, a.k.a. sexual assault” and am somewhat taken aback by your claim that forcing colleges to take a tougher stand on sexual assault somehow translates into a modern version of The Crucible that replaces witchcraft with rape hysteria.

Doctor Gunter, if you’d actually read George Will’s article as you claim, you would have seen that his article wasn’t about the “supposed campus epidemic of rape”. It was a topic on which he spent, arguably, too much time, but that was not the sole focus of his article. I’m wondering if you read only what you wanted to read from it. I’ll get to the idea of colleges taking a “tougher stand on sexual assault” later, and all I’ll say up front is that what you might call a “tougher stand” is certainly a rather troubling idea.

But bear in mind that rape victims are not the only kind of victims on college campuses, and while he, again, spent an inordinate amount of time on sexual assault and rape, he was more speaking to all kinds of victimization on campuses, as noted by this paragraph:

Meanwhile, the newest campus idea for preventing victimizations — an idea certain to multiply claims of them — is “trigger warnings.” They would be placed on assigned readings or announced before lectures. Otherwise, traumas could be triggered in students whose tender sensibilities would be lacerated by unexpected encounters with racism, sexism, violence (dammit, Hamlet, put down that sword!) or any other facet of reality that might violate a student’s entitlement to serenity. This entitlement has already bred campus speech codes that punish unpopular speech. Now the codes are begetting the soft censorship of trigger warnings to swaddle students in a “safe,” “supportive,” “unthreatening” environment, intellectual comfort for the intellectually dormant.

Again, I’m wondering if you only read from the article what you wanted to read as opposed to what was actually written.

I was specifically moved to write to you because the rape scenario that you describe somewhat incredulously is not unfamiliar to me.

The rape scenario that George Will quoted is that of a former student at Swarthmore College named Lisa Sendrow, which she relayed in an interview with Philadelphia Magazine contributing writer Simon Van Zyulen-Wood for an article called, simply, “Rape Happens Here“:

But in the midwinter of 2013, Sendrow says, she was in her room with a guy with whom she’d been hooking up for three months. They’d now decided — mutually, she thought — just to be friends. When he ended up falling asleep on her bed, she changed into pajamas and climbed in next to him. Soon, he was putting his arm around her and taking off her clothes. “I basically said, ‘No, I don’t want to have sex with you.’ And then he said, ‘Okay, that’s fine’ and stopped,” Sendrow told me. “And then he started again a few minutes later, taking off my panties, taking off his boxers. I just kind of laid there and didn’t do anything — I had already said no. I was just tired and wanted to go to bed. I let him finish. I pulled my panties back on and went to sleep.”

This is certainly a problematic situation. But he didn’t describe it “incredulously”. He merely quoted the situation word-for-word out of the magazine article as I have just reproduced here. The alleged incredulity you feel he is granting this situation comes merely from the fact the alleged rape wasn’t reported until six weeks later. And when she attempted to relay details of how she was raped, that is where she was met with what she described as incredulity:

A month and a half went by before Sendrow paid a visit to Tom Elverson, a drug and alcohol counselor at the school who also served as a liaison to its fraternities. A former frat brother at Swarthmore, he was jolly and bushy-mustached, a human mascot hired a decade earlier to smooth over alumni displeasure at the elimination of the football team, which his father had coached when Elverson was a student. When Sendrow told him she had been raped, he was incredulous. He told her the student was “such a good guy,” she says, and that she must be mistaken. Sendrow left his office in tears. She was so discouraged about going back to the administration that it wasn’t until several months later that she told a dean about the incident. Shortly thereafter, both students graduated, and Sendrow says she was never told the outcome of any investigation.

The big problem with this particular situation, and why I called it an “alleged rape”, is simply the lack of evidence. This situation boils down to little more than a “he said, she said” kind of scenario. He could claim consent while she can discount it. Who do you believe? But this situation differs quite differently from the one that you relate in your response, again making me wonder if you actually read what George Will wrote:

The lead up was slightly different, but I too was raped by someone I knew and did not emerge with any obvious physical evidence that a crime had been committed. I tried to push him away, I said “No!” and “Get off” multiple times,” but he was much stronger and suddenly I found my hands pinned behind my back and a forearm crushing my neck and for a few minutes I found it hard to breathe. I was 22, far from home, scared, and shocked and so at some point I just stopped kicking and let him finish.

First I need to point out an inconsistency in your narrative.

You say you “did not emerge with any obvious physical evidence” that you were raped, but then mentioned that your throat was “crushed” by the perpetrator’s forearm. I don’t need to be a medical doctor to know that such an action would’ve likely left some kind of bruising on your throat. That’s physical evidence that you were, at the least, physically assaulted. The rape kit, if collected in a timely manner, would likely have provided evidence of sexual assault. Take those two together, and you probably have evidence that could demonstrate rape charges beyond reasonable doubt in a criminal trial.

You labor under the fear (as some men do) that there is an epidemic of false rape. That good young men will go to jail for consent withdrawn after the fact. And while false accusations likely do happen (the Duke Lacrosse case is a recent, well-known example) these are the exception and not the rule and each time a male with a platform spouts off about a false epidemic of rape it only makes it harder for women who have been violated to come forward.

Not an epidemic of “false rape”, but false rape accusations. And it’s not “likely” that they occur. False rape accusations do happen. And it’s not “consent withdrawn after the fact” either, but also outright manufactured claims of sexual assault, sexual harassment and rape. And what is your evidence that they are the “exception”? I don’t believe there are any statistics on the number of false rape allegations versus legitimate allegations, so for you to say they are the “exception” is as without merit as it would be for me to say they are commonplace.

But the fact they do happen is the reason a lot of men fear the prospect. You see, Doctor, this is one thing you will likely never have to fear. You will never have to fear that a passing glance at a person of the opposite sex at your practice will be construed into a charge of sexual harassment that ends your career. You don’t have to worry about a false rape allegation being levied against you that can also end your career.

You see, the allegation of rape or sexual harassment by itself, just the allegation regardless of evidence corroborating it, can be enough to end careers and ruin lives. This is the reason that George Will mentioned this:

Threatening to withdraw federal funding, the department mandates adoption of a minimal “preponderance of the evidence” standard when adjudicating sexual assault charges between males and the female “survivors” — note the language of prejudgment.

The “preponderance of evidence standard”, Doctor, I’m unsure if you are aware, is merely weighing two mutually exclusive propositions to determine which is more likely to be true. It is far less than the standard of “beyond reasonable doubt” that is necessary to secure a conviction in a criminal case. Now I’m aware of the fact that rape cases are difficult to try, especially if victims do not come forward in a timely manner to report their rape and have a rape kit collected while physical evidence, if any, is still viable.

To lower the standard to mere preponderance allows any woman who regretted her night with a particular guy to suddenly start calling it rape. And feminists have managed to elevate a woman’s claim of rape to be beyond reproach, to be accepted as fact, and you’re a misogynist or a rape apologist if you don’t believe a woman’s rape allegations without question.

As such in the situation relayed above that was quoted by George Will in his article, the question must be asked: how can we know that she was indeed raped, sexually penetrated against explicit denials of consent as claimed, and that she did not just manufacture the story after the fact? We cannot. This is not to say her claim of rape is false, but it is to say we cannot know if it is true. And as the burden of proof for any accusation is on the accuser, we must grant the presumption of innocence.

But when a woman screams rape, even if it doesn’t happen till weeks after the fact, no such presumption is granted. Because to grant that presumption is to be met with waves of screaming feminists demanding you revoke such presumption and accept the accusation of rape outright, regardless of the status of evidence corroborating such an accusation.

Again, Doctor, such allegations, the truth of which notwithstanding, can end careers and ruin lives. And if the accusation is later withdrawn, the damage is still done. And it isn’t just with rape that this is true. False accusations of any heinous nature can do significant damage to a person’s reputation, much of which is likely irreparable. And these accusations will always be levied significantly more against men than women. And they go beyond rape.

After all, if you walk up to a random child who appears in need of help to offer it, you don’t have to be concerned about being looked upon as if you’re going to kidnap that child to have your wicked ways with them.

First a woman has to get over her fear of her assailant and the shame imparted by society and then she has to deal with the police… And if fear and shame and being disbelieved by law enforcement were not enough of a deterrent think about having your pubic hair combed for your rapist’s DNA while you are dripping with his ejaculate. And you have the gall to wonder why some women might not immediately (if ever) report a rape?

And that is why there have attempted to be numerous education programs trying to instill into women’s minds that the first thing they must do after an alleged rape is seek out the police or medical attention. I remember seeing that kind of literature when I was in middle school. The sooner after the incident you seek out the police or a hospital emergency room, the better. And that is true not just with rape, but with any physical assault and really any other crime.

That is merely the fact of the matter, Doctor.

As an OB/GYN, you are likely aware that even if the victim does not shower, the evidence deteriorates quite quickly. As you have collected rape kits, so you say in your article, you are also likely aware of how crucial that evidence along with any other physical evidence on the body is to a successful prosecution. Yes, collecting that evidence can amplify a person’s feelings of degradation because they went from being treated as a piece of meat to being, essentially, a living crime scene. But that doesn’t lessen the importance of collecting that evidence, and that is what must be made clear to the victim: that her cooperation in collecting the physical evidence from her body and her clothing is of paramount importance to seeing her rapist brought to justice.

And if she is unwilling to cooperate, then it must be spelled out to her, made clearer than crystal that she is only jeopardizing her chances of seeing her rapist arrested and prosecuted.

It might sound like I’m being just utterly heartless in writing this, but again that is just the fact of the matter, Doctor.

How easy do you think it is for a scared 20 year-old to call 911 or walk into a police station and say, “I was just raped?”

Easy or not, again, it is a necessity. And if she won’t call 911 or walk into a police station, at the least she needs to visit the emergency room. As most nurses in ERs are women, she will likely have no difficulty in finding help and those sympathetic to what just happened.

There is no woman who I have ever met personally or as an OB/GYN who thinks that surviving a rape confers some sort of privilege.

And from where in George Will’s article are you deriving any implication that even George Will thinks it does. I could find no such implication in reading the article in its entirety. Here is what Will stated:

They are learning that when they say campus victimizations are ubiquitous (“micro-aggressions,” often not discernible to the untutored eye, are everywhere), and that when they make victimhood a coveted status that confers privileges, victims proliferate.

He’s not saying that the victims themselves are demanding or deriving any kind of privilege from their status, but that others are giving it to them. Privileges can also come from other sources. Now if a rape victim herself were to start demanding all kinds of privileges merely because she is an alleged victim of rape, then that would be a quite different story. But as you said, and I agree, it doesn’t happen, or at least it is exceedingly uncommon as to be easily ignored.

But again, Will was not saying the victims themselves think they have some kind of privilege by being a victim. A lot of people probably don’t think such. It’s something a bit more subtle that only becomes apparent when you look for it.

And then we have the professional victims, people who will routinely manufacture all kinds of claims to gain sympathy and, yes, privilege from others. Rebecca Watson is a ready example there, as is Melody Hensley and her Twitter-derived PTSD – interesting story behind that one.

This weekend I was out dancing and experienced what I think you referred to as “micro-aggressions.” I had my buttocks pinched three times and my breasts groped twice. I was called a “bitch” and a “50-year-hag” when I politely declined hopeful suitors. Whether it is a cat call or a grope these actions represent sexual aggression and Mr. Will they have little to do with sex and everything to do with aggression.

As someone who has “cat called” other women and attempted to engage other women in conversation, yes with the intent of possibly finding a sex partner, I can tell you that your blanket statement is not correct. Those men could have genuinely thought that their actions were going to get them a night with you. You cannot know as you cannot read their minds, so your mere interpretation or feeling that you were aggressed upon is not to say that their intent was aggression.

There is no survivor privilege, just survivors.

I wish I could agree. Again, that privilege is not being demanded by the survivors, but being conferred by others upon them for being survivors. There’s a big difference.

Water cooling build in my wife’s computer – Part VI

Build Log:

The original CPU water block was sent on its way to Germany a little later than I wanted, via USPS. That was part of the delay, as I originally wanted to send it either via UPS or FedEx, but both wanted what I considered too large an amount to send a 1lb package international. UPS was the worst, quoting me over $100, while FedEx wanted about $85. DHL quoted me at $75. The postal service, however, wanted only $25 using a flat-rate box.

But at least that’s out of the way.

Revisiting components

While talking with AlphaCool I was looking for alternate hardware, namely to replace the water block. I didn’t want to go with Alphacool again. Nothing on them, and I’m sure my experience was a 1-in-a-million occurrence, but when you are that 1 in the million, it tends to turn you away from them. And in this case, it’s turning me away, at least with regard to the CPU water block.

So I researched around a bit more and found the Koolance CPU-380A, which I ultimately purchased from Performance-PCs to replace the AlphaCool block. About the only concern with the block is its warranty, which carries this provision: “Use of 3rd-party replacement parts, coolants, or coolant additives will void this warranty.” So to keep the warranty in place, you need to use their coolants. This isn’t all that shocking since they can’t possibly test their water blocks with everything on the market. And I have no interest in using any dyes or additives anyway.

But having the block in hand, it feels significantly more solid than the AlphaCool block. I don’t think I’m going to have any problems with it. My only minor complaint is simply how heavy the block is, but again it feels significantly more solid.

For the graphics cards I gave my wife the option to upgrade to something else if she desired, but given that would require acquiring other water blocks, we decided to stick with the GTX 660, and getting two again as well since we’ve already got the water blocks and there is no indication either was damaged.

But on the coolant side, I was originally planning to go with just plain distilled water and copper sulfate, which is an anti-microbial. I ultimately decided to go with Koolance’s coolant in the end to avoid impacting the warranty on the CPU block (EK’s warranties don’t carry such limitations). The Koolance CPU block is entirely nickel-plated copper, even on the side exposed to the fluid, which is perfect as the EK blocks are the same so there isn’t really any concern about mixed metals with regard to the blocks, only the fittings.

Now one thing I discovered searching around on EK’s website is their suggestion that copper sulphate additives not be used as they can tarnish the components, especially nickel components. Again that is what I had originally considered using, just plain distilled water and copper sulphate. And that is what pushed me too Koolance’s liquids. The fact I’m not affecting the warranty on the CPU block is just a nice plus.

Different pump

Around the time I purchased the second radiator that was going to be installed before this whole mess started, I also purchased another pump – the AlphaCool VPP655. Performance-PCs had a special on it, getting the pump body only, no housing, for $75, which is still going on as of the time I write this. Getting this pump to flow, however, when getting it tubed into the smaller radiator has been problematic. I purchased the Bitspower D5 mod top from my local Microcenter for housing it, and again it seemed to not want to flow regardless of what I did. So I found AlphaCool’s HF D5 top for their pump and ordered that in.

In hindsight I should’ve just ordered it to begin with, especially given the price difference. But hey, you live and learn. And now I have a spare D5 pump top. Perhaps I’ll list it on Amazon after I replace the screw that ended up falling down the sink drain.

So why did I go with the D5 pump? Well in trying to tube up the reservoir to her existing pump, I was going through different fittings trying to figure things out, and the threads on the Phobya pump stripped as a result. Fittings can get purchase on it, but in trying to tube things up it’s easy to wrench things loose without realizing it with how stripped the threads have become.

Plus the D5 pump just looked better in the Bitspower housing – and it’ll look still better in comparison to the Phobya pump in the Alpahcool housing I have on the way, especially with the LED I also ordered to go with the unused LED plug that came with the Bitspower reservoir.

And the D5 is considered the more powerful pump as well.

So I’ll just keep the Phobya pump around for creating makeshift loops for flushing components. I do still need to put the new radiator through the water filter, now that I think about it, even though I’ve washed several gallons of distilled water through it. Just to be sure it’s rinsed out completely.

More time to wait

All in all, though, we’re not exactly in a hurry to get another loop built out. Instead I’m more concerned with what Alphacool is going to determine when they receive and examine the CPU block. Now while I’d like to get working on a new water loop for my wife’s machine, I’m content in waiting, even if I wait till I get new graphics cards. I’ve already ordered new thermal pads for the blocks.

I’ve still got plenty to do in the interim. I need to flush out both radiators and both of the graphics card water blocks. I’ll likely need to soak all the fittings in distilled water as well to ensure all traces of the previous coolant is gone. I need to wait for the new pump housing so I can figure out how to tube up everything – actually I have an idea in mind on how to tube the pump to what will be the lower radiator, so it’s just a matter of getting things hooked up and testing for flow.

So there’s definitely more to come in the future on this. And hopefully sometime in the next month I’ll have a finished water loop that won’t leak again two months down the road.

Computer build tip: Front-panel connectors

Here’s a tip I saw recently on a video for Singularity Computers that I decided to implement myself.

Recall from a previous post regarding my wife’s computer that I’m having to rebuild it with a new mainboard. Part of this will require working with the front panel connector plugs, plugging them into the mainboard. I’ve always hated these things because they tend to require being plugged up while working in a tight space.

My wife’s build had the additional concern of the front panel connectors on her case – the Corsair 750D – not being able to reach. But I found extension cables by NZXT at my local Microcenter, so all was saved on that. Well the extension cables allowed me to build out different plugs for the cables, and the fact my wife’s computer caught fire and needed to be rebuilt was the perfect opportunity to try it out as a concept.

Basically I scrounged some USB connectors out of another case I had – actually my wife’s previous case – after pulling all the cables out. Tedious work, because I had to use a staple instead of what could be considered a proper tool, but it saved me from needing to order new ones. And using the FPIO pinout on her mainboard, I assembled two plugs from the extension cables that can then get plugged into her mainboard.

DSC_0725.jpg

DSC_0731.jpg

DSC_0737.jpg

Looks a hell of a lot cleaner, right?

Now this does take a little work, but it definitely allows things to stay cleaner, and these plugs had the added benefit of not slipping off the mainboard’s pin array when tying them up, so I didn’t have to keep double-checking them.

If you want to do this yourself but don’t have any connectors you can scrounge, you can buy additional ones from Performance-PCs. Those ones have the benefit of not having any of the plugs blanked out, so they’ll have greater compatibility with more mainboards, since some mainboards have a full set of pins for the array – this one has blank spots – that could render USB-specific connectors useless.

Now on a full-tower case this isn’t always necessary as you’ll have more room around the mainboard and power supply for accessing the FPIO pin array on the mainboard. On smaller cases, like mid-towers and smaller, I highly recommend giving this a try. But before you do, I’d recommend getting a proper toolkit to help with this.

Water cooling build in my wife’s computer – Part V

Build Log:

Yes the build log continues, but this iteration does not begin on a high note. And just to warn you, this is going to be a long article, but I cover a lot of things that happened in a short period of time with a lot of explanatory information as well.

About 8 weeks post-installation of my wife’s loop, we had a catastrophic failure of one of her components, and I think it’s the CPU block that failed. Recall from previous iterations of this series that the CPU block is the AlphaCool NexXxoS XP³ Light – Plexi Edition. In the loop we’d been using the Mayhem’s XT1 coolant diluted to about 1.5L, about a 10% dilution.

Prior to the failure, I had acquired an AlphaCool XT45 240mm radiator to install in the floor of my wife’s case. My intent with adding the second radiator was to also flush out the coolant and replace it with just straight distilled water and a few drops of copper sulfate. Her reservoir came with a silver plug so there would be no need for a kill coil. And I had intended on doing the installation the weekend following the catastrophic failure, after I had acquired the last of what I needed to do the installation.

Needless to say, those plans got scrapped.

The failure was beyond catastrophic to the point of it being lucky I was home. The leaking coolant fell onto the first graphics card and ignited, while some additional coolant fell to the second graphics card and caused some corrosion but did not ignite. Thankfully the flame didn’t last long, but I cut power and pulled the plug to be sure while also grabbing the fire extinguisher as an extra precaution – you do have one of these in your home, right? Had neither my wife or I been home – the failure occurred about 20 min after she left for work – what would we have been coming home to?

The material safety data sheet for the coolant specifies that the main ingredient is mono-ethylene glycol, which is classified as a flammable liquid – it likely shorted out several of the components on the graphics card where it made contact, causing it to ignite.

Once I was sure nothing was going to flare up, my first move was to drain the loop – that all-important drainage system I made sure to install and test comes in handy yet again. Then it was a matter of pulling things out, starting with the graphics cards. Things didn’t look good.

What led me to believe the CPU block was the cause of the failure was the drips of coolant that were hanging off it after I had drained the loop. You can see from the pictures that there were not any trails of coolant leading from the fittings, leading me to believe the perimeter of the block is what failed, likely from the o-ring inside it. This picture below shows drops of water still sitting on the lower edge of the CPU water block.

DSC_0662.jpg

Under the graphics cards was a horror story as well, as you can tell by the above pictures. This is what happens when you mix flames with PCBs. The fact several of the electricity-regulating components got fried, literally, led me to declare all the singed components to be a total loss.

My concern then fell to what else might have been lost beyond the mainboard and graphics cards. The memory chips looked perfectly fine, but the scorching reached to alongside the CPU socket. Getting the block off the CPU, I was able to inspect it and didn’t see anything obvious wrong with it. There wasn’t any scorching or anything like that on the CPU, so I was confident it survived – though I would need to acquire another mainboard to know for certain to set up a bench test on both the CPU and memory chips with a spare video card.

So yet another trip to my local Microcenter was in order. In the mean time I needed to also get the larger radiator out of the system so I could flush it out, get all traces of the glycol coolant out of what remained of the loop, along with the pump and reservoir.

In the mean time, I also took some time to see if I could figure out what happened. I built a makeshift loop with another pump and reservoir and some spare fittings to get the CPU block back under pressure. One thing I noticed right away was the thickness of the water coming out of the loop, as if the glycol solution had separated and gelled up inside the block. How that could lead to the catastrophic failure I’m unsure, but I could definitely notice the water coming out of the block and back toward the reservoir was definitely not the same as the water that originally went in and it seemed a lot of the concentrate was being rinsed out.

Unfortunately I was not able to reproduce a leak, so I’m not sure what happened, and in hindsight I realized that what I could’ve done was hooked the pump to an external power supply to keep the loop under pressure to see if I could observe a leak. But when your system just caught fire, you’re probably not going to be thinking along those lines.

But I was still of the conclusion that the CPU block was to blame, either directly through a component failure, or indirectly by way of the coolant separating and gelling up. So the next task on the list was getting ahold of AlphaCool.

* * * * *

Contacting AlphaCool

Now trying to figure out how to contact AlphaCool was initially not easy, as their main website is a mix of English and German and I’m an English-only kind of person. So I contacted Performance-PCs, the retailer through which I ordered the block, for assistance in contacting AlphaCool to help get this or at the least investigated. Performance-PCs forwarded my e-mail of to their sales representative with AlphaCool UK who replied back to them with permission to give me his e-mail address. So I sent an e-mail directly to the sales rep:

Recall from the previous e-mail chain with Performance-PCs that the component in question is the AlphaCool NexXxoS XP3 Light – Plexi Edition. It was installed on an AMD FX-8350 processor on an ASRock 990FX Extreme4 mainboard.

How to begin on this… I believe the AlphaCool CPU water block that was being used in my wife’s computer failed in some way and leaked coolant inside her computer, causing components to literally catch fire. Thankfully the fire was small and did not last long, but it still caused the loss of two graphics cards plus her mainboard. I’m unsure if the memory and CPU were lost as well as I have not yet had an opportunity to test those, as I need to acquire a new mainboard first.

Getting back to the water block. It was installed about eight (8) weeks ago. The installation was smooth and the leak testing went smoothly as well and I had no reason to believe there was a leak from any of the components or fittings in the loop. Everything ran smoothly until yesterday afternoon when the aforementioned leak occurred. I’m unsure if the failure was due to the water block being faulty, or if the issue was caused or exacerbated by the coolant I chose for her system — Mayhem’s XT-1 Clear, which according to its material safety data sheet is made from monoethylene glycol (MSDS is available here: http://www.mayhems.co.uk/front/download/XT1-150ml-MSDS.pdf).

I also have pictures of the components following the failure, and I can forward those to you if you desire — they are several megabytes a piece which is why I have not just directly attached them here.

So the first thing I believe needs to happen is I need to get the CPU block back to AlphaCool to be examined. So starting with that, how can I get the process started to do that?

Again my intent with initiating contact was to find out if the CPU block actually failed, and AlphaCool would be best able to examine this. They can determine if the block did actually fail due to some fault in its manufacture, or if the coolant was the issue. If the coolant was the concern, then I would have to take things up with Mayhem’s. As it was a Friday afternoon my time when I contacted him, meaning Friday night in the UK, I realized it might be till the following Monday before I heard back.

And the following Monday I received a reply from AquaCool’s UK representative, pointing me to the details on how I can start a defective item claim through the Aqua Tuning store, which I started that evening after getting home as the support request required attaching pictures for defective items. Good thing I have a high quality camera.

* * * * *

Microcenter and Testing the hardware

At Microcenter, I considered getting her the same mainboard I run in my system, the Gigabyte 990FXA-UD3, which Microcenter had for a shelf-price of $135. Unfortunately they did not have her original mainboard in stock anymore. But in searching their site the night of the fire, I discovered they had an ASUS Sabertooth R2.0 mainboard for $148 as an open box – it’s typically $185 on the shelf right now. So for only $13 more, I decided to spring for that given this is for a predominantly gaming machine that will, in the end, be overclocked and water cooled. Unfortunately the mainboard did not have the back-panel I/O shield, but I was able to order a replacement through ASUS’s eStore.

When I got home, I decided to break down the computer more out of the case. I discovered that the smell from the burnt PCB had gotten into the radiator, and I wasn’t sure how to get that smell out. I decided that the best attempt would be to run the fans that were on it continually to see if that would work. The smell was also on the case, and I wasn’t sure if I’d have to scrap it or if I could recover it in similar fashion. I was hoping I wouldn’t have to scrap either.

First order of business though would be testing the CPU and memory chips.

I set up a test workbench on the mainboard’s box, using the stock CPU cooler I still had around and a spare graphics card along with a spare power supply. Once I got everything seated and double-checked (the DRAM_LED on the mainboard kept trying to tell me the memory chips weren’t seated properly), I powered it up and watched as everything came to life. So far, so good, and meaning I wasn’t out yet another $300 in hardware for the processor and memory chips, or so I hoped.

But merely getting a response from the mainboard wouldn’t tell me if the CPU and chips suffered any damage, only that they were responding when the mainboard pinged them. To fully test them, I booted up an Ubuntu USB drive and pulled Prime95 off the web. Now for the CPU cooler I was using IC Diamond thermal compound, and the temperature maxed out at 53C according to Psensor, running Small FFT on all 8 cores to have them maxed out at 100%. I left that running for about an hour before declaring it done – if there were any major issues, I figured it would’ve been found within that time frame.

After that came the memory test with MemTest86+ – press F6 while the nearly-blank purple screen is displayed as the live drive is booting and select “Test Memory”. That test came back clean as well.

So thankfully the only losses were the graphics cards and the mainboard – the latter of which is already replaced simply because I needed it to make sure the CPU and memory chips weren’t dead as well, as well as set my wife up with a working system until I can start building out a water cooling loop again. That will happen when I get another CPU water block, as I’ll build out a CPU water loop at least since the stock AMD cooler sounds like a blow drier.

* * * * *

Smelly components

If you’ve ever had the wonderful opportunity to be in the vicinity of burning PCBs, you probably know the smell very readily. Prior to this, the last time I encountered that smell that I can readily recall was a little over 15 years ago when I attempted to upgrade a computer with an AT mainboard and power supply. Some of you probably know where this is going. I connected the power supply to the mainboard incorrectly, and fried the power supply and the mainboard as a result – literally there was smoke coming out of the power supply via the exhaust fan. My father was sitting in the living room at the time – we lived in a 3 bedroom apartment – and he recognized the smell straight away.

Now thankfully that smoke wasn’t accompanied by any flames, that I could readily tell at least, so the smell didn’t really linger. Unfortunately for my wife’s computer, the smell got into her radiator and also settled quite readily into her case. I wasn’t ready to declare them to be a loss, though, though I feared I would be doing so.

After getting her case virtually cleared out, I got the Bitspower X-Station out as well and used it for powering the fans on her radiator (Corsair SP120s) with an external power supply and let the fans blow overnight before checking on them. The smell was almost completely gone from the radiator after that. There was a slight lingering odor where there was a gap between two fans, but I wasn’t concerned as the vast majority of the smell was gone, though I did leave the fans blowing for another couple hours to clear out as much of the last as possible.

Taking that as a good sign, I set up a large fan to blow on her case. My wife and I had a concert in Omaha to see that day (Lindsey Stirling at the Sumtur Amphitheater in Papillion, NE), so there’d be plenty of time for the fan to do its work, hopefully. Now I knew the case would likely take longer simply because it’s larger but the fan did do the trick. We got home about 3am following the concert, and when I checked on the case I could not smell any of that burnt scent on it.

Another $225 in components saved.

* * * * *

Following up with AlphaCool

The reply to my e-mail to the AlphaCool support e-mail address would be from the UK rep. I had no idea the e-mail would be going to the same person, and worded my e-mail as such. The reply included two follow-up questions: was the pump still working and were the temperature alarms turned off on the mainboard?

The manual for the mainboard doesn’t specify any kind of configurable alarms, so the answer to the latter is No by default. I do know that many modern mainboards have temperature fail-safes: they will power the system off if the CPU gets too hot. And if you attempt to turn the system back on, it’ll either power down quickly or the BIOS will issue a beep code saying the CPU is overheating.

You might be surprised to know that this feature wasn’t implemented until relatively recently in computer years. This meant that prior to such an implementation, it was quite easy to cook your processor, and the mainboard with it. Computer processors get very, very hot – hotter than you can touch without burning your skin – even with the kind of air cooling solutions available. It is easy for the processor temperature to jump into the 40s Celsius in just the first 15 seconds after you turn on the computer, and that’s with the processor fan on. Without the fan on, or without a cooling solution on the processor at all, temperatures can fast climb over 100 Celsius and higher, getting hot enough to literally fry the processor and mainboard – search YouTube for ‘cpu no heatsink’ and you’ll find some videos showing this.

Recently I saw a video of a guy building a computer where he didn’t even put the cooling solution onto his processor before getting it powered on. He had a somewhat good reason for doing so: he wanted to get the computer to POST before continuing further, as if it didn’t POST, then he would’ve had reason to believe something was faulty. Without those failsafes, though, he could’ve easily fried his machine doing that. And as in that video he was using an ASUS Rampage IV Extreme mainboard with an Intel i7 3930K processor – i.e. $1,000 worth of components according to NewEgg’s current pricing – it was one costly risk to take that thankfully worked out in the end.

Personally, I was waiting for the thing to practically burst into flame watching the video.

And I certainly understand the nature of the question regarding the pump, given that in my e-mail to the support address and the earlier e-mail, I’m alleging that the failure of the component that is still under warranty and should not have failed caused the loss of several hundred dollars in components. So naturally he’s going to want to ask a few additional questions to determine if another failure in the system led to the block failing. And as CPUs can get pretty hot, if the pump failed, then the coolant would start heating up, possibly causing a build-up of steam pressure inside the loop, with coolant leaking at the first point of failure.

But I tested the pump by setting up a makeshift loop and all was well. So far everything still points to the CPU block.

* * * * *

And that is where I’ll call this iteration. I’ll be sending the block into AlphaCool later this week, which will be interesting since I’ve never actually mailed anything international before – AlphaCool is in Germany. I’ll continue with another iteration once I hear back from AlphaCool on the status of the water block or if I have anything new to add with regard to getting my wife’s system back up and running.

Why so passive on harassment?

Time to sound like a complete pig.

There seems to be more and more articles showing up about women talking about what has become known as "street harassment". I recently encountered one such article today, courtesy of one of my Facebook friends. And the common denominator among all of these articles is this: this is what happened to me, and we know the problem is pervasive in society.

And then skeptical people like me come along and ask one question that has yet to be answered: how pervasive is it, and what evidence can corroborate this alleged pervasiveness? Because the rule of thumb with most skeptically minded people is simply that the plural of anecdote is not data. Yet merely calling into question the pervasiveness of such harassment tends to get me labeled quite quickly: misogynist, rape apologist, victim blamer, and on from there. Hell even suggesting that women carry firearms, as it’s been shown that presenting a firearm to a potential attacker will get you out of that situation virtually every time, gets me labeled the same by much the same people.

On the mark of there not being really any significant amount of data backing up the claim that street harassment is pervasive, I have one question: given the pervasiveness of camera phones and smartphones, and smaller video-capable cameras also available on the market, where is the video of this occurring? I mean video cameras and their mere presence is enough to keep police officers at bay – mostly.

The author of the above-linked article noted that much of her harassment occurred while she was riding her bike. She doesn’t need to just merely put up with it, but why is her response to it merely complaining about it, either to her boyfriend or, now, online? Why are the subsequent events to this alleged harassment merely just writing about it or complaining about it? Why does it seem no one is actually doing anything about it?

I’d wager that if the author of that article had a small camera mounted to her bike that was constantly recording, with the blinking light clearly and plainly visible, she’d probably get left alone a good majority of the time. I’m not going to say 100% of the time, but it’d probably come pretty close as there are always going to be assholes out there who will be assholes even if a camera is rolling. And the harassment events she does capture will have clear and decisive evidence to back it up – possibly evidence that could stand up in Court.

Yet no one seems to be taking such a pro-active role in trying to combat this "epidemic" of harassment against women. And I don’t understand it. Instead it seems the programmed response to saying that women need to be pro-active is, "We need to tell men to not rape", or something along those lines. And the cycle continues, and the only thing women do about it is complain or wallow in secrecy.

Meanwhile people like me, who say that pro-active measures need to be taken, are called victim blamers, rape apologists and misogynists.

Let me put it this way: if merely telling or teaching people to not break into homes actually worked, home alarms and car alarms wouldn’t be necessary. If merely telling people to not kill was enough, concealed carry wouldn’t be a consideration. And if telling men to not rape – and telling women to not rape as well – was all it took, women wouldn’t have any basis for complaint. So why is it that women continue to want to take passive roles on this? Why do they continue to suffer, only to complain about it online or in secret, when there are proactive measures they can take to actually combat the problem?

It makes me wonder if they actually want the problem to go away. I’m not talking about the women who are actually being victims. I’m certain they want the issue to disappear. I’m talking about the women who seem to be fueled by each story of this happening, the ones whose livelihoods are funded by the fact this issue exists. I’m really starting to wonder if they actually want the issue to go away. If they did, they’d be calling for women to be more proactive. The means exist to be more proactive. We have the technology, yet it doesn’t seem to be getting used. Why not?

I really think it’s because there is a small group of women who need these victims to not only exist but for more to keep cropping up. And until women get more pro-active about harassment, they will not only be victims for their harassers, but will also be used by those who need them around for their own livelihoods.

And really that seems to be a problem, not just with street harassment, but in general. Too many people are making money or gaining political power from the victims of harassment and violent crime, meaning I don’t believe they genuinely want the issue to go away or become a very infrequent occurrence, because their power and money would then dry up in short order.

Nowhere else to move

Back in December 2012, just after the Sandy Hook tragedy, the anti-gunners were hoping that the incident would turn gun laws in their direction, hoping that it would lead to numerous new restrictions on firearms. While they would win in many State legislatures – in States already having restrictive gun laws, so they wouldn’t exactly gain any new ground – they would  lose at the Federal level.

After the tragedy in Isla Vista, CA, gun owners are once again being blamed.

Here’s the irony: California already gives the anti-gunners, the “gun control lobby”, most everything they could want, and it still could not stop a lunatic with an inferiority complex. Elliot Rodger passed not just one, but two background checks. And this isn’t the NICS “instant” background check, but a background check conducted across a 10-day waiting period. He legally acquired two 9mm pistols. And under California law, those pistols also had to be registered with the State, and he had to pass a firearms safety course prior to purchasing his first pistol as well.

So why did this not work? Why did laws not stop him? Because like the other mass shooters before him, laws did not dissuade him. The bureaucratic hurdles lawmakers threw in front of him didn’t slow him down. He had his mind set on killing women. His manifesto detailed his plans. This was a man with an extreme inferiority complex combined with one hell of a sense of entitlement, who wanted to make the world suffer because the world wasn’t giving him what he felt he had coming.

He even made disturbing videos and posted them online, and his behavior was becoming increasingly worrisome, resulting in a visit by the police. Why did the police not move to seize his firearms? Was there nothing under California law allowing the police to obtain a seizure warrant through the Court? Was there nothing the State of California could’ve done that could’ve prevented this tragedy? At the least, was no one in law enforcement watching his YouTube account?

Instead people are once again blaming gun owners. And the reason is quite simple: the person on whom all blame should instead be laid put a bullet through his head.

This incident has the gun control lobby pretty much backed into a corner. The only legitimate move they have now is to call for outright bans on firearms. Nothing they could request will ever again be seen as “common sense”. Everything else they’ve called “common sense” and “necessary to prevent future tragedies” failed to stop such a tragedy.

So now anything less than a complete and total ban on firearms called for by any anti-gun group is pretty much a petty exercise, because Isla Vista shows it won’t be enough, that it won’t meet the ends they claimed it would meet.

In short, virtually all of gun control’s claims pretty much died with the Isla Vista killer and his six victims.